Cutters are used to cut slots in a fingerboard for mounting of frets.
The cutters make slots straight, without chipping, cracks or fluffiness. Cutters are of high manufacturing accuracy (± 0.02 mm) and of increased resistance to wear. They are made of special tool steel and fit for regrinding. Operating conditions: the cutter is to be built into wood-processing equipment appropriate the standards of assurance of cutting wood machine-tools according to GOST 69-75. Radial run-out of the cutter placed on shaft (into the holder) of the machine tool is to be for 2 opposite teeth, max: 0.04 mm. End run-out of teeth side surface of cutter about an axis of shaft, max: 0.04 mm. Maximum frequency of cutter's rotation: 3100 min (-1). Speed of the feed: 0.1-0.3 m/min.
Show more
Hide
Set of cutters (22 pcs) for fret mounting
Price:
on request
CHARACTERISTICS:
- Model:
8018220
- Number of cutters in set:
22 pcs
- Outer diameter:
80 mm
- Inner diameter:
25 mm, 28 mm, 30 mm, 32 mm, 40 mm, on request
- Tooth thickness:
0,43 mm, 0,52 mm, 0,65 mm, on request
Cutters are used to cut slots in a fingerboard for mounting of frets.
The cutters make slots straight, without chipping, cracks or fluffiness. Cutters are of high manufacturing accuracy (± 0.02 mm) and of increased resistance to wear. They are made of special tool steel and fit for regrinding. Operating conditions: the cutter is to be built into wood-processing equipment appropriate the standards of assurance of cutting wood machine-tools according to GOST 69-75. Radial run-out of the cutter placed on shaft (into the holder) of the machine tool is to be for 2 opposite teeth, max: 0.04 mm. End run-out of teeth side surface of cutter about an axis of shaft, max: 0.04 mm. Maximum frequency of cutter's rotation: 3100 min (-1). Speed of the feed: 0.1-0.3 m/min.
Show more
Hide
Set of cutters (24 pcs) for fret mounting
Price:
on request
CHARACTERISTICS:
- Model:
8018240
- Number of cutters in set:
24 pcs
- Outer diameter:
80 mm
- Inner diameter:
25 mm, 28 mm, 30 mm, 32 mm, 40 mm, on request
- Tooth thickness:
0,43 mm, 0,52 mm, 0,65 mm, on request
Cutters are used to cut slots in a fingerboard for mounting of frets.
The cutters make slots straight, without chipping, cracks or fluffiness. Cutters are of high manufacturing accuracy (± 0.02 mm) and of increased resistance to wear. They are made of special tool steel and fit for regrinding. Operating conditions: the cutter is to be built into wood-processing equipment appropriate the standards of assurance of cutting wood machine-tools according to GOST 69-75. Radial run-out of the cutter placed on shaft (into the holder) of the machine tool is to be for 2 opposite teeth, max: 0.04 mm. End run-out of teeth side surface of cutter about an axis of shaft, max: 0.04 mm. Maximum frequency of cutter's rotation: 3100 min (-1). Speed of the feed: 0.1-0.3 m/min.
Tang nippers provide a very clean L-shape cut at the fret tang butt-end.
Frets with suchwise nipped tang butt-ends provide an opportunity of decorative filling of the slots on a fingerboard (to cover edges with the plastic ending etc.). Nippers are the universal tool. They can be used for tangs of frets of different models.
Show more
Hide
Fret limiter of tang nipping
Price:
on request
CHARACTERISTICS:
- Model:
11.2 – 3
- Application features:
Only with SINTOMS tang nipper
Russian
English